The MAX4940/MAX4940A integrated circuits generate high-voltage, high-frequency, unipolar or bipolar pulses from low-voltage logic inputs. These quad/dual pulsers feature independent logic inputs, independent high-voltage pulser outputs with active clamps and independent high-voltage supply inputs.

The MAX4940/MAX4940A feature quad, high-voltage pulsers with 8.5Ω output impedance for the high-voltage outputs and a 21Ω impedance for the active clamp. The high-voltage outputs can provide 2.0A (typ) output current.

All devices use two logic inputs per channel to control the positive and negative pulses. The MAX4940/MAX4940A have a dedicated input to control the active clamp. All devices feature an independent enable input EN. All digital inputs are CMOS compatible. (See Ordering Information/Selector Guide.)

The MAX4940/MAX4940A are available in a 56-pin, 8mm x 8mm, TQFN exposed pad package and are specified over the 0°C to +70°C commercial temperature range.

Warning: Exercise caution. The MAX4940/MAX4940A are designed to operate with high voltages.

?

High-Density Quad-Channel Pulser in One Package

0 to +220V Unipolar or ±110V Bipolar Outputs

8.5Ω (typ) Output Impedance and 2.0A (typ) Output Current

27Ω (typ) Always-On Active Clamp with Integrated Blocking Diodes

Integrated Output Diodes (MAX4940A Only)

No Special Power-Supply Sequencing Required for Trilevel Applications

Matched Rise/Fall Times and Matched Propagation Delays

CMOS-Compatible Logic Inputs

56-Pin, 8mm x 8mm, TQFN Package