?

1:PRESERVE8:
Reguire8和Preserve8
C和匯編有8位對齊的要求，這兩個偽指令可以滿足此要求，存在REQUIRE8<——> PRESERVE8的對應關系，但不是說有一個REQUIRE8就要有一個 PRESERVE8，如果是一個c文件和一個匯編文件的調用，也就涉及一個PRESERVE8或者是一個REQUIRE8.
另外，REQUIRE8和PRESERVE8并不完成8 byte 對齊的操作，對齊由ALIGN完成。

將ADS的代碼移植到KEIL MDK上需要做的修改:
當用戶擁有ADS遺留工程的所有源代碼時,使用MDK重新編譯鏈接全部代碼是最好的解決方法,MDK中的新版本編譯工具會重新生成滿足堆棧8BYTE對齊要求的目標文件,避免由于堆棧不對齊引起的鏈接錯誤.
從ADS到KEIL很重要的一個修改的地方就是這里的8BYTE對齊,想要編譯通過,在startup.s里面我們必須加入PRESERVE8指令,使得寄存器8BYTE對齊.
代碼:
CODE32
PRESERVE8? ;這個在KEIL里面是必須的,要求8BYTE對齊.在ADS的啟動代碼中就沒有.
AREA vectors,CODE,READONLY

2: ARM的處理器可工作于多種模式,下面設置個模式的一些參數.
Mode_USR??????? EQU???? 0x10? 用戶模式??
Mode_FIQ??????? EQU???? 0x11? 快中斷模式
Mode_IRQ??????? EQU???? 0x12? 中斷模式
Mode_SVC??????? EQU???? 0x13? 管理模式
Mode_ABT??????? EQU???? 0x17? 中止模式
Mode_UND??????? EQU???? 0x1B? 未定義模式
Mode_SYS??????? EQU???? 0x1F? 系統模式
參數的由來:這里各個模式的參數是由寄存器CPSR的模式位設置M[4:0]得來的,比如這里的用戶模式,CPSR的M[4:0]設置為10000就是0x10,同理其他.詳見<>P47頁,CPSR設置很關鍵!

3:?
I_Bit?????????? EQU???? 0x80??????????? ; when I bit is set, IRQ is disabled
F_Bit?????????? EQU???? 0x40??????????? ; when F bit is set, FIQ is disabled
也和CPSR寄存器的設置有關,這里兩位是禁止/開啟快速中斷和一般中斷的設置.

4: 各模式下定義的堆棧地址.
UND_Stack_Size? EQU???? 0x00000000
SVC_Stack_Size? EQU???? 0x00000100
ABT_Stack_Size? EQU???? 0x00000000
FIQ_Stack_Size? EQU???? 0x00000000
IRQ_Stack_Size? EQU???? 0x00000100
USR_Stack_Size? EQU???? 0x00000200
設置堆棧大小
Stack_Size????? EQU???? (UND_Stack_Size + SVC_Stack_Size + ABT_Stack_Size +?
???????????????????????? FIQ_Stack_Size + IRQ_Stack_Size + USR_Stack_Size)
??????????????? AREA??? STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem?????? SPACE?? Stack_Size
Stack_Top?????? EQU???? Stack_Mem + Stack_Size
堆棧大小的設置,各公司寫的啟動代碼有所不同,但是不影響大局,可以借鑒一些你認為比較簡單的啟動代碼,然后寫自己的堆棧地址和大小設置程序.

5:堆的設置
Heap_Size?????? EQU???? 0x00000000
??????????????? AREA??? HEAP, NOINIT, READWRITE, ALIGN=3
Heap_Mem??????? SPACE?? Heap_Size
AREA Init,CODE,READONLY,ALIGN=3 //指定后面的指令為8位對齊(2的3次方)
align n
它的含義就是使得下面的代碼按一定規則對齊，.align n 指令的對齊值有兩種方案，n 或 2^n ，各種平臺最初的匯編器一般都不是gas，采取方案1或2的都很多，gas的目標是取代原來的匯編器，必然要保持和原來匯編器的兼容，因此在gas中如何解釋 .align指令會顯得有些混亂，原因在于保持兼容。arm-linux是按照2^n的方案對齊的. ARM的.align 5就是2的5次方(32位)對齊，也就是4字節(32位)對齊.

6: AREA??? RESET, CODE, READONLY
?? ARM
下面的是ARM的代碼,不是THUMB.

7: 中斷向量表
Reset
??????? LDR???? PC, ResetAddr
??????? LDR???? PC, UndefinedAddr
??????? LDR???? PC, SWI_Addr
??????? LDR???? PC, PrefetchAddr
??????? LDR???? PC, DataAbortAddr
??????? DCD???? 0xb9205f80
??????? LDR???? PC, [PC, #-0xff0]
??????? LDR???? PC, FIQ_Addr

ResetAddr?????????? DCD???? ResetInit
UndefinedAddr?????? DCD???? Undefined
SWI_Addr??????????? DCD???? SoftwareInterrupt
PrefetchAddr??????? DCD???? PrefetchAbort
DataAbortAddr?????? DCD???? DataAbort
Nouse?????????????? DCD???? 0
IRQ_Addr??????????? DCD???? 0
FIQ_Addr??????????? DCD???? FIQ_Handler

;未定義指令
Undefined
??????? B?????? Undefined
;軟中斷
SoftwareInterrupt???
??????? B?????? SoftwareInterrupt?
;取指令中止
PrefetchAbort
??????? B?????? PrefetchAbort
;取數據中止
DataAbort
??????? B?????? DataAbort
;快速中斷
FIQ_Handler
??????? STMFD?? SP!, {R0-R3, LR}
??????? BL????? FIQ_Exception
??????? LDMFD?? SP!, {R0-R3, LR}
??????? SUBS??? PC,? LR,? #4

8: InitStack????
??????? MOV???? R0, LR
;Build the SVC stack
;設置管理模式堆棧
??????? MSR???? CPSR_c, #0xd3??
??????? LDR???? SP, StackSvc?
;Build the IRQ stack?
;設置中斷模式堆棧
??????? MSR???? CPSR_c, #0xd2
??????? LDR???? SP, StackIrq
;Build the FIQ stack
;設置快速中斷模式堆棧
??????? MSR???? CPSR_c, #0xd1
??????? LDR???? SP, StackFiq
;Build the DATAABORT stack
;設置中止模式堆棧
??????? MSR???? CPSR_c, #0xd7
??????? LDR???? SP, StackAbt
;Build the UDF stack
;設置未定義模式堆棧
??????? MSR???? CPSR_c, #0xdb
??????? LDR???? SP, StackUnd
;Build the SYS stack
;設置系統模式堆棧
??????? MSR???? CPSR_c, #0x5f????????????????? ;#0xdf
??????? LDR???? SP, =StackUsr
??????? MOV???? PC, R0

9:? BL? InitStack?????????????? ;初始化堆棧 Initialize the stack
??? BL? TargetResetIni;目標板基本初始化??????????????????????????????????????? ;跳轉到c語言入口 Jump to the entry point of C program
B?????? __main

周立功啟動代碼:
;/****************************************Copyright (c)**************************************************
;**?????????????????????????????? Guangzou ZLG-MCU Development Co.,LTD.
;**????????????????????????????????????? graduate school
;**???????????????????????????????? http://www.zlgmcu.com
;**
;**--------------File Info-------------------------------------------------------------------------------
;** File name: ???Startup.s
;** Last modified Date:? 2004-09-17
;** Last Version: ??1.0
;** Descriptions: ??The start up codes for LPC2100, including the initializing codes for the entry point of exceptions and the stacks of user tasks.
;**????Every project should have a independent copy of this file for related modifications
;**------------------------------------------------------------------------------------------------------
;** Created by: ???Chenmingji
;** Created date:?? ??2004-02-02
;** Version:????1.0
;** Descriptions: ??The original version//原著
;**
;**------------------------------------------------------------------------------------------------------
;** Modified by: ??Chenmingji
;** Modified date:??2004-09-17
;** Version:????1.01
;** Descriptions: ??Modified the bus setting to adapt for many common situations?
;**???????????????????????????? //改進了總線,可以根據這里的更改來控制總線的速率
;**------------------------------------------------------------------------------------------------------
;** Modified by: ??Chenmingji
;** Modified date:??2004-09-17
;** Version:????1.02
;** Descriptions: ??Added codes to support the enciphering of the chip
;**???????????????????????????? //增加了芯片加密
;**------------------------------------------------------------------------------------------------------
;** Modified by: ??Chenmingji
;** Modified date:??2004-09-17
;** Version:????1.04
;** Descriptions: ??Renewed the template, added codes to support more compilers?
;**???????????????????????????? //重建模板,加入更多代碼來支持更多的編譯
;**------------------------------------------------------------------------------------------------------
;** Modified by: ??
;** Modified date:
;** Version:?
;** Descriptions:?
;**
;********************************************************************************************************/

;define the stack size
;定義堆棧的大小
SVC_STACK_LEGTH???????? EQU???????? 0
FIQ_STACK_LEGTH???????? EQU???????? 0
IRQ_STACK_LEGTH???????? EQU???????? 256
ABT_STACK_LEGTH???????? EQU???????? 0
UND_STACK_LEGTH???????? EQU???????? 0

NoInt?????? EQU 0x80

;定義處理器模式,用戶/管理/系統/中斷
USR32Mode?? EQU 0x10
SVC32Mode?? EQU 0x13
SYS32Mode?? EQU 0x1f
IRQ32Mode?? EQU 0x12
FIQ32Mode?? EQU 0x11

PINSEL2???? EQU 0xE002C014//定義PINSEL2地址,這個地址的值一般用戶不需要改變,和芯片的加密有關
??????????????????????????? //更改后有可能使得JTAG調試失效,進入芯片加密狀態.
BCFG0?????? EQU 0xFFE00000
BCFG1?????? EQU 0xFFE00004
BCFG2?????? EQU 0xFFE00008
BCFG3?????? EQU 0xFFE0000C//定義存儲器組配置寄存器

BCFG_16DEF?EQU???? 0x10000400????? ;// 16Bit Bus
BCFG_CS3??? EQU??(BCFG_16DEF | (0x01<<00) | (0x07<<05) | (0x07<<11))?? ;// 分別是IDCY/WST1/WST2對應讀寫速率等
????????????????????????????????? ;//從第0位開始對其寫入0001，
?????????????????????????????????????????????? ;//從第5位開始寫入0111
???????????????????????????????????????????????????????????? ;//從11位開始寫入0111(0x07)/11111(0x1f)?
??? IMPORT __use_no_semihosting_swi

;The imported labels
;引入的外部標號在這聲明
??? IMPORT? FIQ_Exception?????????????????? ;Fast interrupt exceptions handler 快速中斷異常處理程序
??? IMPORT? __main????????????????????????? ;The entry point to the main function C語言主程序入口?
??? IMPORT? TargetResetInit???????????????? ;initialize the target board 目標板基本初始化

;The emported labels
;給外部使用的標號在這聲明
??? EXPORT? bottom_of_heap
??? EXPORT? StackUsr
????
??? EXPORT? Reset
??? EXPORT __user_initial_stackheap

??? CODE32

??? AREA??? vectors,CODE,READONLY
??????? ENTRY

;interrupt vectors
;中斷向量表
Reset
??????? LDR???? PC, ResetAddr
??????? LDR???? PC, UndefinedAddr
??????? LDR???? PC, SWI_Addr
??????? LDR???? PC, PrefetchAddr
??????? LDR???? PC, DataAbortAddr
??????? DCD???? 0xb9205f80
??????? LDR???? PC, [PC, #-0xff0]
??????? LDR???? PC, FIQ_Addr

ResetAddr?????????? DCD???? ResetInit
UndefinedAddr?????? DCD???? Undefined
SWI_Addr??????????? DCD???? SoftwareInterrupt
PrefetchAddr??????? DCD???? PrefetchAbort
DataAbortAddr?????? DCD???? DataAbort
Nouse?????????????? DCD???? 0
IRQ_Addr??????????? DCD???? 0
FIQ_Addr??????????? DCD???? FIQ_Handler

;未定義指令
Undefined
??????? B?????? Undefined

;軟中斷
SoftwareInterrupt???
??????? B?????? SoftwareInterrupt?

;取指令中止
PrefetchAbort
??????? B?????? PrefetchAbort

;取數據中止
DataAbort
??????? B?????? DataAbort

;快速中斷
FIQ_Handler
??????? STMFD?? SP!, {R0-R3, LR}
??????? BL????? FIQ_Exception
??????? LDMFD?? SP!, {R0-R3, LR}
??????? SUBS??? PC,? LR,? #4
????????
;/*********************************************************************************************************
;** unction name ?函數名稱: ?InitStack
;** Descriptions ?功能描述: ?Initialize the stacks? 初始化堆棧
;** input parameters ?輸　入:?? ?None 無
;** Returned value?? ?輸　出 :? ?None 無
;** Used global variables 全局變量: ?None 無
;** Calling modules ?調用模塊: ?None 無
;**?
;** Created by ??作　者: ?Chenmingji 陳明計
;** Created Date ?日　期: ?2004/02/02 2004年2月2日
;**-------------------------------------------------------------------------------------------------------
;** Modified by ?修　改:?
;** Modified date ?日　期:?
;**-------------------------------------------------------------------------------------------------------
;********************************************************************************************************/
InitStack????
??????? MOV???? R0, LR
;Build the SVC stack
;設置管理模式堆棧
??????? MSR???? CPSR_c, #0xd3??
??????? LDR???? SP, StackSvc?
;Build the IRQ stack?
;設置中斷模式堆棧
??????? MSR???? CPSR_c, #0xd2
??????? LDR???? SP, StackIrq
;Build the FIQ stack
;設置快速中斷模式堆棧
??????? MSR???? CPSR_c, #0xd1
??????? LDR???? SP, StackFiq
;Build the DATAABORT stack
;設置中止模式堆棧
??????? MSR???? CPSR_c, #0xd7
??????? LDR???? SP, StackAbt
;Build the UDF stack
;設置未定義模式堆棧
??????? MSR???? CPSR_c, #0xdb
??????? LDR???? SP, StackUnd
;Build the SYS stack
;設置系統模式堆棧
??????? MSR???? CPSR_c, #0x5f????????????????? ;#0xdf
??????? LDR???? SP, =StackUsr

??????? MOV???? PC, R0

;/*********************************************************************************************************
;** unction name ?函數名稱: ?ResetInit
;** Descriptions ?功能描述: ?RESET? 復位入口
;** input parameters ?輸　入:?? ?None 無
;** Returned value?? ?輸　出 :? ?None 無
;** Used global variables 全局變量: ?None 無
;** Calling modules ?調用模塊: ?None 無
;**?
;** Created by ??作　者: ?Chenmingji 陳明計
;** Created Date ?日　期: ?2004/02/02 2004年2月2日
;**-------------------------------------------------------------------------------------------------------
;** Modified by ?修　改: Chenmingji 陳明計
;** Modified date ?日　期: 2004/02/02 2004年3月3日
;**-------------------------------------------------------------------------------------------------------
;********************************************************************************************************/
ResetInit
;初始化外部總線控制器，根據目標板決定配置
;
;?????????? LDR???? R0, =PINSEL2
;?? IF :DEF: EN_CRP
;??????? LDR???? R1, =0x0f814910
;??? ELSE
;??????? LDR???? R1, =0x0f814914
;??? ENDIF
;??????? STR???? R1, [R0]

??????? LDR???? R0, =BCFG0
??????? LDR???? R1, =0x1000ffef?????????? ;0x00001046
??????? STR???? R1, [R0]

??????? LDR???? R0, =BCFG1
??????? LDR???? R1, =BCFG_CS3?????????????? ;0x1000ffef????????? ;0x1000ffef;;
??????? STR???? R1, [R0]

??????? LDR???? R0, =BCFG2
??????? LDR???? R1, =0x2000ffef
??????? STR???? R1, [R0]

;??????? LDR???? R0, =BCFG3
;??????? LDR???? R1, =0x00000CA0?????????? ;0x2000ffef
;??????? STR???? R1, [R0]
???????????????
??????? BL????? InitStack?????????????? ;初始化堆棧 Initialize the stack
??????? BL????? TargetResetInit???????? ;目標板基本初始化 Initialize the target board
??????????????????????????????????????? ;跳轉到c語言入口 Jump to the entry point of C program
??????
??????? B?????? __main

;/*********************************************************************************************************
;** unction name ?函數名稱: ?__user_initial_stackheap
;** Descriptions ?功能描述: ?Initial the function library stacks and heaps, can not deleted!?? 庫函數初始化堆和棧，不能刪除
;** input parameters ?輸　入:?? ?reference by function library 參考庫函數手冊
;** Returned value?? ?輸　出 :? ?reference by function library 參考庫函數手冊
;** Used global variables 全局變量: ?None 無
;** Calling modules ?調用模塊: ?None 無
;**?
;** Created by ??作　者: ?Chenmingji 陳明計
;** Created Date ?日　期: ?2004/02/02 2004年2月2日
;**-------------------------------------------------------------------------------------------------------
;** Modified by ?
;** Modified date ?
;**-------------------------------------------------------------------------------------------------------
;********************************************************************************************************/
__user_initial_stackheap????
??? LDR?? r0,=bottom_of_heap
;??? LDR?? r1,=StackUsr
??? MOV?? pc,lr

StackSvc?????????? DCD???? SvcStackSpace + (SVC_STACK_LEGTH - 1)* 4
StackIrq?????????? DCD???? IrqStackSpace + (IRQ_STACK_LEGTH - 1)* 4
StackFiq?????????? DCD???? FiqStackSpace + (FIQ_STACK_LEGTH - 1)* 4
StackAbt?????????? DCD???? AbtStackSpace + (ABT_STACK_LEGTH - 1)* 4
StackUnd?????????? DCD???? UndtStackSpace + (UND_STACK_LEGTH - 1)* 4

;/*********************************************************************************************************
;** unction name ?函數名稱: ?CrpData
;** Descriptions ?功能描述: ?encrypt the chip
;** input parameters ?輸　入:?? ?None 無
;** Returned value?? ?輸　出 :? ?None 無
;** Used global variables 全局變量: ?None 無
;** Calling modules ?調用模塊: ?None 無
;**?
;** Created by ??作　者: ?Chenmingji 陳明計
;** Created Date ?日　期: ?2004/03/27 2004年3月27日
;**-------------------------------------------------------------------------------------------------------
;** Modified by ?修　改:?
;** Modified date ?日　期:?
;**-------------------------------------------------------------------------------------------------------
;********************************************************************************************************/
??? IF :DEF: EN_CRP
??????? IF? . >= 0x1fc
??????? INFO??? 1," The data at 0x000001fc must be 0x87654321. Please delete some source before this line."
??????? ENDIF
CrpData
??? WHILE . < 0x1fc
??? NOP
??? WEND
CrpData1
??? DCD???? 0x87654321????????? ;/*When the Data is 為0x87654321,user code be protected. 當此數為0x87654321時，用戶程序被保護 */
??? ENDIF
????
;/* 分配堆棧空間 */
??????? AREA??? MyStacks, DATA, NOINIT, ALIGN=2
SvcStackSpace????? SPACE?? SVC_STACK_LEGTH * 4? ;Stack spaces for Administration Mode 管理模式堆棧空間
IrqStackSpace????? SPACE?? IRQ_STACK_LEGTH * 4? ;Stack spaces for Interrupt ReQuest Mode 中斷模式堆棧空間
FiqStackSpace????? SPACE?? FIQ_STACK_LEGTH * 4? ;Stack spaces for Fast Interrupt reQuest Mode 快速中斷模式堆棧空間
AbtStackSpace????? SPACE?? ABT_STACK_LEGTH * 4? ;Stack spaces for Suspend Mode 中止義模式堆棧空間
UndtStackSpace???? SPACE?? UND_STACK_LEGTH * 4? ;Stack spaces for Undefined Mode 未定義模式堆棧

??????? AREA??? Heap, DATA, NOINIT
bottom_of_heap??? SPACE?? 1

??????? AREA??? Stacks, DATA, NOINIT
StackUsr

??? END
;/*********************************************************************************************************
;**??????????????????????????? End Of File
;***************************************************************************************************