ADI公司的ADP1032是高性能雙路隔離微功耗管理單元(PMU),組合了隔離的反激和DC/DC穩壓器,提供兩個隔離的電源軌.此外,ADP1032還包含四個高速串行外設接口(SPI)隔離通路和三個通用隔離器,用于需要低功耗和小型解決方案尺寸的通路到通路的應用.輸入工作電壓從4.5 V 到60 V,隔離的輸出電壓VOUT1從6V到28V(可調整型)或24V(固定型),而VOUT2工廠可編程輸出電壓為5.15V,5.0V或3.3V.ADP1032反激穩壓器的開關頻率為250kHz,降壓穩壓器工作在125kHz.兩個穩壓器相互間是移相的,以降低電磁干擾(EMI).ADP1032能由外接的350 kHz到750 kHz振蕩器驅動,以簡化敏感應用時的噪聲過濾電路.器件工作溫度?40℃到+125℃,9 mm×7 mm, 41引腳LFCSP封裝.主要用在工業自動化和過程控制,儀器和數據采集系統,數據和電源隔離等.中電網為您整理如下詳細資料,本文介紹了ADP1032主要特性,框圖,典型應用電路以及評估板ADP1032CP-x-EVALZ主要特性,電路圖,材料清單和PCB設計圖.

The ADP1032 is a high performance, isolated micropower management unit (PMU) that combines an isolated flyback and a dc-to-dc regulator providing two isolated power rails. Additionally, the ADP1032 contains four high speed serial peripheral interface (SPI) isolation channels and three general-purpose isolators for channel to channel applications where low power dissipation and small solution size is required. Operating over an input voltage range of 4.5 V to 60 V, the ADP1032 generates isolated output voltages of 6 V to 28 V (adjustable version) or 24 V (fixed version) for VOUT1, and factory programmable voltages of 5.15 V, 5.0 V, or 3.3 V for VOUT2. By default, the ADP1032 flyback regulator operates at a 250 kHz switching frequency, and the buck regulator operates at 125 kHz.

The two regulators are phase shifted relative to each other to reduce electromagnetic interference (EMI). The ADP1032 can be driven by an external oscillator in the range of 350 kHz to 750 kHz to ease noise filtering in sensitive applications. The digital isolators integrated in the ADP1032 use Analog Devices, Inc., iCoupler? chip scale transformer technology, optimized for low power and low radiated emissions. The ADP1032 is available in a 9 mm × 7 mm, 41-lead LFCSP and is rated for a ?40℃ to +125℃ operating junction temperature range.

ADP1032主要特性:

Wide input supply voltage range: 4.5 V to 60 V
Integrated flyback power switch
Generates two isolated, well regulated independent outputs
VOUT1: 24 V or 6 V to 28 V
VOUT2: 3.3 V, 5.0 V, or 5.15 V
Uses a 1:1 ratio transformer for simplified transformer design
Peak current limiting and OVP for flyback and buck regulators
Precision enable input and power-good output
Adjustable switching frequency via SYNC input
Internal compensation and soft start control per regulator
High speed, low propagation delay, SPI signal isolation channels
Three 100 kbps general-purpose isolated data channels
lead, 9 mm × 7 mm LFCSP form factor enables small overall solution size
?0°C to +125°C operating junction temperature range
Safety and regulatory approvals (pending)
CISPR11 Class B radiated emission UL recognition: 2500 V rms for 1 minute duration per UL 1577 CSA Component Acceptance Notice 5A
300 V rms basic insulation between slave, master, and field power domains (IEC 61010-1, pending) VDE certificate of conformity
DIN V VDE 0884-10 (VDE 0884-10):2006-12
VIORM = 565 VPEAK

ADP1032應用:

Industrial automation and process control
Instrumentation and data acquisition systems
Data and power isolation
?

圖1.ADP1032典型應用電路

圖2.ADP1032簡化框圖

圖3.ADP1032和AD74412R典型應用電路

評估板ADP1032CP-x-EVALZ

The ADP1032CP-x-EVALZ (where x represents the device model number of 1 through 5) can be used to demonstrate the functionality of the ADP1032 dc-to-dc converters and the isolated data channels.
Simple device measurements, such as line regulation, load regulation, and efficiency can be evaluated with the board. The performance of the isolated digital channels can also be evaluated. Device features, including oscillator synchronization, soft start, power good monitoring, sequencing and slew rate control may be demonstrated.

評估板ADP1032CP-x-EVALZ主要特性:

Input voltage range: 4.5 V to 60 V
Output voltage for VOUT1: 24 V or 6 V to 28 V
Output voltage for VOUT2: 3.3 V, 5.0 V, or 5.15 V
Enable and disable controls
Slew rate controls
Access to SYNC pin for oscillator synchronization
Access to all seven data channels
EVALUATION KIT CONTENTS
ADP1032CP-x-EVALZ

圖4.評估板ADP1032CP-x-EVALZ外形圖

圖5.評估板ADP1032CP-x-EVALZ特性分布圖

圖6.評估板ADP1032CP-x-EVALZ頂層元件詳圖

圖7.評估板ADP1032CP-x-EVALZ電路圖(1)

圖8.評估板ADP1032CP-x-EVALZ電路圖(2)
評估板ADP1032CP-x-EVALZ材料清單:

圖9.評估板ADP1032CP-x-EVALZ PCB設計圖(1):頂層

圖10.評估板ADP1032CP-x-EVALZ PCB設計圖(2):底層

圖11.評估板ADP1032CP-x-EVALZ PCB設計圖(3):頂層絲印
中電網為您整理如下詳細資料詳情請見:
https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1032.pdf
和https://www.analog.com/media/en/technical-documentation/user-guides/ADP1032CP-x-EVALZ-UG-1594.pdf
ADP1032.pdf
ADP1032CP-x-EVALZ-UG-1594.pdf