Wuppertal， Germany based industrial designer Stefan Reichert presented a new 3D printer concept for his Bachelor of Arts in Industrial Design at the University of Wuppertal： XEOS 3D printer.

This desktop 3D printer separates itself from conventional printers through its two windows design. It has a 5x5x5 inch （127x127x127 mm） build envelope which is 66% smaller than the smallest FDM 3D printer with the same build envelope （Stratsys Mojo）。

The uplifting door controlled by the Stop/Open button on the outside gives easy access to the printed parts and the cartridge bays. The integrated fisheye camera helps to control the printing process from everywhere. The LED status bar displays the printjob progress and is easy to see even across the room.

The innovative FDM print arm is inspired by a robotic arm on a wafter handling robot. Watch below the print arm in action.

The XEOS 3D printer supports ABS and PLA plastic filament and its new black support polymer material is easily removable with hot water. They are held by two material cartridge bays.

自動翻譯僅供參考

XEOS 3D打印機

伍珀塔爾，德國工業設計師斯特凡·賴克特提出了他的文學士工業設計在烏珀塔爾大學的新的3D打印機概念：XEOS 3D打印機。

這個桌面3D打印機通過它的兩個窗口設計將自己與傳統打印機分開。它有一個5x5x5英寸（127x127x127mm）的構建信封，比最小的FDM 3D打印機具有相同的構建信封（Stratsys Mojo）小66%。

振奮人心的門口外面的停止/打開按鈕控制，可以輕松訪問打印部分和墨盒托架。集成的魚眼鏡頭的相機幫助來自世界各地的控制印刷過程。 LED狀態欄顯示將打印作業進度，很容易，甚至在房間里看到的。

創新FDM打印臂是通過在wafter處理機器人的機器人手臂的啟發。觀看下面的打印臂動作。

該XEOS 3D打印機支持ABS和PLA塑料絲及新的黑色支持高分子材料很容易拆卸用熱水。它們是由兩個材料盒托架保持。