ESM6802是英創公司推出的基于Freescale i.MX6DL雙核處理器(ARM Cortex-A9，主頻1GHz)的高性能工控主板，預裝正版Windows Embedded Compact 7(WEC7)嵌入式操作系統，WEC7一個最重要的特性就是對多核處理器的支持(Symmetric Multi-Processing(SMP))，下面將通過應用程序來測試在單核和多核情況下系統的執行情況，為了更直觀的比較，同時參與測試的還有ESM3354，ESM3354是基于TI Coertex-A8處理器的工控主板，CPU主頻1GHz，同樣預裝WEC7操作系統。

所設計的測試程序代碼如下，其中的TestSmp函數有兩個輸入參數，第一參數表示要創建測試線程的數量，第二個參數為所創建線程的運行時長。cbTestSmp是被創建的測試線程，測試線程主要是在一個while循環中，反復讀取內存變量然后與預設值進行比較，在運行設定的時間后自動退出循環，其中的threadParam->loops變量會記錄下while循環總共執行的次數。

typedefstruct_SMP_THREAD_PARAM

{

UINT32 durationMs;

UINT32 threadId;

UINT64 loops;

BOOL bSetAffinity;

UINT32 sandBoxSize;

LPVOID sandBoxStart;

}SMP_THREAD_PARAM, *PSMP_THREAD_PARAM;

ULONGcbTestSmp(LPVOID param)

{

PSMP_THREAD_PARAM threadParam = (PSMP_THREAD_PARAM)param;

DWORD tStart = GetTickCount();

UINT8 *buffer = (UINT8 *)threadParam->sandBoxStart;

wprintf(L"Ahou, Thread %d, running for %d ms\r\n", threadParam->threadId,

threadParam->durationMs);

// Write to sandbox

for(UINT32 i = 0; i < threadParam->sandBoxSize; i++)

{

buffer[i] = (UINT8)(i);

}

while( (GetTickCount() - tStart) < threadParam->durationMs)

{

// Read back from sandbox

for(UINT32 i = 0; i < threadParam->sandBoxSize; i++)

{

if(buffer[i] != (UINT8)(i))

{

wprintf(L"Thread %d : error at byte %d for loop %I64d !!\r\n",

threadParam->threadId, i, threadParam->loops);

}

}

threadParam->loops++;

}

wprintf(L"Thread %d : terminating\r\n", threadParam->threadId);

return0;

}

voidTestSmp(UINT32 nNumOfThread, UINT32 durationMs)

{

UINT32 i;

PSMP_THREAD_PARAM threadParams;

HANDLE *threadHandles;

UINT64 totalLoops = 0;

UINT32 sandBoxSize = 1024 * 128; // 128 kB

HANDLE h_array[1];

threadParams = (PSMP_THREAD_PARAM)malloc(nNumOfThread *sizeof(SMP_THREAD_PARAM));

if(threadParams == NULL)

{

wprintf(L"Failed allocating thread params !\r\n");

return;

}

threadHandles = (HANDLE *)malloc(nNumOfThread *sizeof(HANDLE));

if(threadHandles == NULL)

{

wprintf(L"Failed allocating thread handles !\r\n");

return;

}

for(i = 0; i < nNumOfThread; i++)

{

threadParams[i].bSetAffinity = TRUE;

threadParams[i].threadId = i;

threadParams[i].durationMs = durationMs;

threadParams[i].loops = 0;

threadParams[i].sandBoxSize = sandBoxSize;

threadParams[i].sandBoxStart = malloc(sandBoxSize);

threadHandles[i] = CreateThread(NULL, 0, cbTestSmp, &threadParams[i], 0, NULL);

wprintf(L"Thread handle %d : 0x%x\r\n", i, threadHandles[i]);

}

h_array[0] = threadHandles[0];

DWORD res = WaitForSingleObject(h_array[0], INFINITE);

Sleep(500);

if(res == WAIT_TIMEOUT)

{

wprintf(L"Timeout waiting for threads !\r\n");

}

else

{

wprintf(L"All threads exited\r\n");

}

for(i = 0; i < nNumOfThread; i++)

{

wprintf(L"Thread %d did run %I64d loops\r\n", i, threadParams[i].loops);

totalLoops += threadParams[i].loops;

free(threadParams[i].sandBoxStart);

CloseHandle(threadHandles[i]);

}

wprintf(L"Total number of loops %I64d (%I64d millions)\r\n", totalLoops,

totalLoops / 1000000);

free(threadHandles);

free(threadParams);

}

將上述測試代碼編譯生成為exe文件，分別在ESM3354和ESM6802上運行，設置while循環的執行時間均為10000ms，測試結果如下：

1、創建單個線程

當測試程序只創建一個測試線程時，ESM3354的while循環執行了6791次，ESM6802執行7493次，雖然ESM6802為雙核處理器，但由于程序只有一個線程，即同一時刻只有一個線程在運行，所以在相同的時間內，循環的次數僅略多于ESM3354。由于ESM3354和ESM6802的CPU主頻同樣都是1GHz，所以可以認為ESM6802多出的循環次數也就是Cortex-A8與Cortex-A9在代碼執行效率上的差別。

2、創建兩個線程

當測試程序創建了兩個線程時，ESM3354會將CPU資源大約平均的分配給兩個線程，如上表中線程1執行了3390次，線程2執行了3442次，兩個線程總共執行的次數與只創建單個線程測試時的循環次數相當。ESM6802為雙核CPU，在測試程序有兩個線程的情況下，在同一時刻兩個線程可以同時運行，所以總的循環次數大約是單個線程測試時的兩倍。

通過上面的測試可以看到，在多線程情況下，如果操作系統支持多核處理器，那么雙核CPU的運算能力將是單核CPU的兩倍。