01

現象描述

如下圖所示，STA不關聯或不漫游至就近的AP 2，而是主動關聯了AP 13。

02

原因分析

STA使用的某網卡，僅支持2.4G bgn協議，相對于13信道，更偏愛1~11信道，即在STA同時收到13信道和其它信道相同的SSID時，更易連入非13信道的AP。

03

操作步驟

1. 查看AP 2和AP 13信道及功率情況。

a）執行命令display radio查看AP的發射功率和信道。

[AC] displayradio ap-id 2

--------------------------------------------------------------------------------------------------

AP IDName RfID Band TypeST CH/BW CE/MESTA CU WM

--------------------------------------------------------------------------------------------------

2 xxxx0 2.4G 11ax on 13/20M 20/292 16% normal

2 xxxx1 5G 11ax on52/40M+ 28/30 11% normal

--------------------------------------------------------------------------------------------------

Total:2

[AC] displayradio ap-id 13

--------------------------------------------------------------------------------------------------

AP IDName RfID BandType ST CH/BWCE/ME STA CUWM

--------------------------------------------------------------------------------------------------

13 xxxx0 2.4G 11axon 9/20M 12/29 018% normal

13 xxxx1 5G 11ax on44/40M+ 28/30 02% normal

--------------------------------------------------------------------------------------------------

b）執行命令display station sta-mac查看終端上報的AP功率情況，確認在STA上接收到就近AP（AP 2）的場強比接收到的AP 13的場強更強。

[AC-wlan-view]display station neighbor sta-mac sta-mac

------------------------------------------------------------------------------------------------------------------------------

DeviceMAC Device ID Device Name Radio ID ChannelProbe info(RSSI/HHSS) 11kinfo[RCPI/RSNI/HHSS]

------------------------------------------------------------------------------------------------------------------------------

xxxx-xxxx-0410 13AP13 0 9 -67/2035 180/ - /2030

xxxx-xxxx-0490 2AP2 0 13 -45/2047 184/ - /2009

c）執行命令display ap neighbor ap-id 13查看AP 13的鄰居信息，確認AP 2是AP 13的鄰居AP且相比其他鄰居AP的場強更強。

[AC-wlan-view]display ap neighbor ap-id 13

Radio: RadioID of AP

In controlAP:

----------------------------------------------------------------------------------------------------------------------------

Radio AP IDAP name Channel Received RSSI(dbm) RSSI pathloss(db) RSRP pathloss(db) Last Update Time

----------------------------------------------------------------------------------------------------------------------------

0 12AP12 13 -76 105 108 2021-06-27/2008

0 2AP2 13 -57 86 87 2021-06-27/2008

2. 檢查AP對終端的漫游引導動作。a）查看智能漫游配置，AC上正常配置了智能漫游功能。

[AC-wlan-view]rrm-profile name default

[AC-wlan-rrm-prof-default]display this

#

smart-roamroam-threshold snr 35

smart-roamquick-kickoff-threshold snr 10

sta-load-balancedynamic disable

#

b）分別在AP和AC上查看STA的漫游標志。

# 在AC上查看終端信息，結果顯示為粘性終端。

[AC] displaystation sta-mac sta-mac

Autonavigationroaming optimization support : No

Available forroaming : Yes

Stickystation or not : Yes

Aimlessroaming support in sticky state :Yes

Stationdevice type : -

# 在AC上查看終端遷移記錄，可以觀察到終端沒有被遷移的目標AP，也就是終端被盲切了，而且終端最終還是關聯了AP 13，也就是終端未能遷移成功。

[AC-wlan-view]display station steer-history | include sta-mac

S/T/A:Source/Target/Actual

Flag:V[Voice/Video/ActiveSTA]

BTM successtimes/BTM total times:441/919

Deauthsuccess times/Deauth total times:0/0

--------------------------------------------------------------------------------------------------------------------

Time Sta Device(S/T/A) Radio(S/T/A)Rssi(S/T/A) Reason Move-mode BTM_CODEFlag Result

--------------------------------------------------------------------------------------------------------------------

2021-06-27/1907 sta-mac 13/-/13 0/-/0 -71/-/-71 Sticky BTM - -Not Move

2021-06-27/1900 sta-mac 13/-/13 0/-/0 -71/-/-72 Sticky BTM - -Not Move

# 在AP執行命令displayumac station sticky-table，發現該終端被標志為粘性終端。

[AP13-diagnose]display umac station sticky-table

--------------------------------------------------------------------------------------------------

STA MAC Frequency SNRState SSID

--------------------------------------------------------------------------------------------------

sta-mac 2.4G 29 sticky office

結合上述信息分析可知，STA被盲切，但STA并未關聯就近的AP 2。按正常情況，即使終端首次接入網絡不關聯AP 2，也會被智能漫游功能遷移到AP 2上，而實際STA并未及時關聯至AP 2，而是關聯到了遠端的AP 13。

3. 嘗試將AP 2（信道13 ）與AP 13（信道9）進行信道調換測試，確認STA對信道是否有特殊偏愛。

[AC] wlan

[AC-wlan-view]ap-id 2

[AC-wlan-ap-2]radio 0

[AC-wlan-radio-2/0]calibrate auto-channel-select disable

[AC-wlan-radio-2/0]channel 20mhz 9

Warning: Thisaction may cause service interruption. Continue?[Y/N]y

4. 將2.4G射頻的調優信道集設置為1，6，11，進行調優之后測試，該STA接入和漫游均正常。[AC]wlan [AC-wlan-view]regulatory-domain-profile name default[AC-wlan-regulate-domain-default]dca-channel 2.4g channel-set 1,6,11

審核編輯 ：李倩