The Quad-MxFE System Development Platform contains four MxFE? software defined, direct RF sampling transceivers, as well as associated RF front-ends, clocking, and power circuitry. The target application is phased array radars, electronic warfare, and ground-based SATCOM, specifically a 16 transmit/16 receive channel direct sampling phased array at L/S/C band (0.1 GHz to ~5GHz). The Rx & Tx RF front-end has drop-in configurations that allow for customized frequency ranges, depending on the user’s application.

The Quad-MxFE System Development Platform highlights a complete system solution. It is intended as a testbed for demonstrating multi-chip synchronization as well as the implementation of system level calibrations, beamforming algorithms, and other signal processing algorithms. The system is designed to mate with a VCU118 Evaluation Board from Xilinx?, which features the Virtex? UltraScale+? XCVU9P FPGA, with provided reference software, HDL code, and MATLAB system-level interfacing.

In addition to the Quad-MxFE Digitizing Card, the kit also contains a 16Tx/16Rx Calibration Board that is used to develop system-level calibration algorithms, or otherwise more easily demonstrate power-up phase determinism in situations pertinent to their own use case. The Calibration Board also allows the user to demonstrate combined-channel dynamic range, spurious, and phase noise improvements and can also be controlled via a free MATLAB add-on when connected to the PMOD interface of the VCU118.

The system can be used to enable quick time-to-market development programs for applications like:

• ADEF (Phased-Array, RADAR, EW, SATCOM)
• Communications Infrastructure (Multiband 5G and mmWave 5G)
• Electronic Test and Measurement

• High-Level Overview
  1. System Features
  2. General Description
• Getting Started - Install Fan/Heat Sinks Prior To First Use!
  1. Equipment Needed
  2. Required Software
     1. Download Supported Bitstreams & Use Cases
     2. IIO Oscilloscope
  3. MATLAB Control Overview
     1. Simple Tx & Rx Control
     2. System Phase/Amplitude Alignment/Equalization Using Programmable Finite Impulse Response Filters
     3. Demonstrate Multi-Chip Synchronization
     4. Low-Latency ADC-to-DAC Loopback Bypassing JESD204b/c Interface for Repeater or Translator Applications
• Hardware Information
  1. Transmit Path
  2. Receive Path
  3. Clocking Architecture
  4. Digital Interface
  5. Control Interfaces
  6. Power Distribution
  7. Thermal Considerations
  8. Schematic
• HDL
  1. Rev A/B. Quad-MxFE HDL Reference Design
  2. Rev C. Quad-MxFE HDL Reference Design
• Multi-Chip Synchronization Guide
• Related Documents
  1. Publications
  2. IC Part Pages

• Multi-channel, wideband system development platform for the AD9081 MxFE?
• Mates with Xilinx VCU118 Evaluation Board (Not Included)
• 16x RF Receive (Rx) Channels (32x Digital Rx Channels)
  • Total 16x 1.5GSPS to 4GSPS ADC
  • 48x Digital Down Converters (DDCs), Each Including Complex Numerically-Controlled Oscillators (NCOs)
  • 16x Programmable Finite Impulse Response Filters (pFIRs)
• 16x RF Transmit (Tx) Channels (32x Digital Tx Channels)
  • Total 16x 3GSPS to 12GSPS DAC
  • 48x Digital Up Converters (DUCs) , Each Including Complex Numerically-Controlled Oscillators (NCOs)
• Flexible Rx & Tx RF Front-Ends
  • Rx: Filtering, Amplification, Digital Step Attenuation for Gain Control
  • Tx: Filtering, Amplification
• Multiple System Control and Analysis Tools
  • IIO Oscilloscope GUI
  • MATLAB Add-Ons & Example Scripts
  • HDL and Embedded Software Solutions for JESD204b/JESD204c Bring-Up
• Provided Application-Specific Examples
  • Multi-Chip Synchronization for Power-Up Phase Determinism
  • System-Level Amplitude/Phase Alignment Using NCOs
  • Low-Latency ADC-to-DAC Loopback Bypassing JESD Interface
  • pFIR Control for Broadband Channel-to-Channel Amplitude/Phase Alignment
  • Fast-Frequency Hopping
• On-Board Power Regulation from Single 12V Power Adapter (Included)
• Flexible Clock Distribution
  • On-Board Clock Distribution from Single External 500MHz Reference
  • Support for External Converter Clock
• On-board power regulation from 12V power adaptor (included)

This user guide serves as the main source of information for system engineers and software developers using the Quad-MxFE System Evaluation Board, which contains four AD9081 software defined, direct RF sampling transceivers, as well as associated RF front-end, clocking, and power circuitry. The target application is phased array radars, electronic warfare, and ground-based SATCOM, specifically a 16 transmit/16 receive channel direct sampling phased array at L/S/C band (0.1 GHz to ~5GHz). The Rx & Tx RF front-end has drop-in configurations that allow for customized frequency ranges, depending on the user’s application.

The Quad-MxFE System Evaluation Board highlights a complete system solution. It is intended as a testbed for demonstrating multi-chip synchronization as well as implementation of system level calibrations, beam forming algorithms, and other signal processing algorithms. The board is designed to mate with a VCU118 Evaluation Board from Xilinx?, which features the Virtex? UltraScale+? XCVU9P FPGA, with provided reference software and HDL code.

Below is the full integrated system including the VCU118, ADQUADMXFE1EBZ, and ADQUADMXFE-CAL in full operation.

• Quad MxFE Power (Green) LED Information
• Quad MxFE Clock (Blue) LED Information
• Calibration Broad LED Information
• VCU118 LED Information (pg. 85)

• Multichannel RF to Bits Development Platform
• Power-Up Phase Determinism Using Multichip Synchronization Features in Integrated Wideband DACs and ADCs

• AD9081
• AD9082
• AD9081/AD9082 Zynq UltraScale+ MPSoC ZCU102 Quick Start Guide
• UG-1578 User Guide

• ADF4371
• ADF4371 IIO Wideband Synthesizer Linux Driver

• HMC7043
• HMC7044 Clock Jitter Attenuator with JESD204B Linux Driver

• LTM4633

• LTM8063

• LTM8053

• Xilinx Virtex UltraScale+ FPGA VCU118