本文詳細介紹了如何把MiniGUI 應用于以嵌入式Linux 為操作系統的智能呼吸機中。首
先介紹了呼吸機的工作原理；接著詳細介紹了如何基于MiniGUI 實現智能呼吸機中人機界面應用程序的設計思想和實現方法；最后討論了移植MiniGUI 到核心板S3C2410 的過程。結果表明，該方案解決了以往呼吸機控制精度低、監測參數不直觀的缺陷，使呼吸機的界面達到了智能美觀的效果。
關鍵詞 圖形用戶界面；智能呼吸機；設計；移植 ；嵌入式Linux
Abstract： This paper summarizes how to use the MiniGUI in the certain embedded
products such as Intelligent Ventilator. Firstly the working principle of
Intelligent Ventilator is given in the paper, then how to use the MiniGUI to design
the interfaces is precisely introduced, and last how to transplant the MiniGUI into
the S3C2410 is discussed. The result shows that it has well overcome the various
kinds of problems exiting in the old ventilator and so the new ventilator is
intelligent.
Key words: MiniGUI；Intelligent Ventilator；design；transplant ；Embedded Linux