1. Two 4-digit voltage and current readings accurately
display actual or limit values simultaneously
2. Autotracking for 25 V outputs synchronization provides
required symmetrical voltages for easier and faster
setup
3. Output ON/OFF key allows you to enable or disable
power outputs, providing extra protection to the
device-under-test
4. Easy-to-use settings knob allows quick and easy?
voltage or current settings
5. Resolution key provides ? ne setting on voltage or
current resolutions for better accuracy
6. Three independent outputs
(0 to + 6 V / 5 A and 0 to ± 25 V / 1 A) minimize any
interference between circuit-under-tests
Bias supply of ± 25 V allows you to set appropriate
operating points
7. Front-panel VFD (vacuum-? uorescent display) shows
and monitors actual or limit values simultaneously
8. Delicate device-under-tests are provided with?
overvoltage and overcurrent protection
9. Three completed power supply setup states can be
stored and recalled from internal non-volatile memory,
reducing your setup time
10. Remote sensing function eliminates errors in voltage
regulation due to voltage drop at load leads
11. Single output power supplies give you the ? exibility to
select from dual output ranges
? E3632A (0 to 15 V / 7A or 0 to 30 V / 4 A)
? E3633A (0 to 8 V / 20 A or 0 to 20 V / 10 A)
? E3634A (0 to 25 V / 7 A or 0 to 50 V / 4 A)