為解決采用315 MHz或433 MHz頻段無線接收模塊的系統，干擾源多，接收靈敏度低，設計調試復雜等問題，提出了一種868 MHz無線接收模塊的設計方案。方案中采用英飛凌低功耗單芯片F(xiàn)SK/ASK超外差無線接收器TDA5210，以及少量的外圍分立器件。通過改善接收模塊PCB中銅箔天線走向，提高接收靈敏度;在接收模塊的電源和地的輸入端串入磁珠，以減少來自應用系統中晶振等高頻器件的噪聲干擾。實驗結果表明，基于TDA5210的無線接收模塊，設計調試簡單，干擾源少，抑制噪聲能力強，接收靈敏度高，工作穩定。

　　Abstract:

　　The appliance system of wireless receive module which works in 315MHz or 433MHz has some problems such as many interference sources，low receive sensitivity，complex design and debugging. To solve the problems，a design of 868MHz wireless receive module was proposed in the 868MHz receive module，the Infineon low power consumption single chip FSK/ASK superheterodyne receiver TDA5210 and few peripheral discrete components were used. The receive sensitivity was increased by improving the layout of PCB antenna. The noise from the crystal in the appliance system was decreased by using the magnetic bead in input terminal of the power and ground. The results indicate that the wireless receive module based on TDA5210 is easy to design and debugging，and has advantages such as few inferference sources，strong ability of noise reduction，high receive sensitivity，and works steadily.