超微 X6DA3-G2主板英文版/說明書
超微 X6DA3-G2主板英文版說明書.zip
主板的安裝步驟：
1．確認主板配件
2．安裝CPU
3．安裝內存
4．查證跳線是否正確
5．然后安裝在機箱
6．安裝擴展支架或所有接線
7．安裝其它的設備，并確認正確連接到主板接口。
注意：
A.在安裝主板時，先把JCS設為正常模式，設置方法請看本章節(jié)對JCS的說
明進行設置。
B.安裝主板前，請不要將ATX電源通電，連接到主板上，否則會損壞主板。
Safety Instructions
1. Always read the safety instructions carefully.
2. Keep this User Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the equipment from overheating. Do not cover the openings.
6. Make sure the voltage of the power source and adjust properly 110/220V before connecting the equipment to the power inlet.
7. Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
8. Always Unplug the Power Cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
非常好我支持^.^
(0) 0%
不好我反對
(0) 0%