| Regulated outputs (#) | 3 |
| Vin (Min) (V) | 2.2 |
| Vin (Max) (V) | 6.5 |
| Iout (Max) (A) | 3 |
| Rating | HiRel Enhanced Product |
| LDO | 1 |
| Iq (Typ) (mA) | 0.075 |
| Features | Over Current Protection |
| Processor name | Spartan-3 |
| Processor supplier | Xilinx |
| Shutdown current (ISD) (Typ) (uA) | 0.05 |
| Switching frequency (Typ) (kHz) | 300 |
| Configurability | Factory programmable, Software configurable, User programmable |
- Two 95% Efficient, 3-A Buck Controllers and One 300-mA LDO
- Tested and Endorsed by Xilinx for Powering the Spartan-3, Spartan-3E, and Spartan-3L FPGAs
- Adjustable (1.2 V to 6.5 V for Bucks, 1 V to 6.5 V for LDO) Output Voltages on All Channels
- Input Voltage Range: 2.2 V to 6.5 V
- Independent Soft-Start for Each Supply
- Independent Enable for Each Supply for Flexible Sequencing
- LDO Stable with 2.2-μF Ceramic Output Capicitor
- Small, Low-Profile 4,5 mm × 3,5 mm × 0,9 mm QFN Package
- SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Military (–55°C/125°C) Temperature Range(1)
- Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
- APPLICATIONS
- FPGA/DSP/ASIC Supplies
- Set-Top Boxes
- DSL Modems
- Plasma TV Display Panels
(1) Additional temperature ranges available - contact factory
Spartan is a trademark of Xilinx, Inc.
The TPS75003 is a complete power management solution for FPGA, DSP and other multi-supply applications. The device has been tested with and meets all of the Xilinx Spartan-3, Spartan-3E, and Spartan-3L start-up profile requirements, including monotonic voltage ramp and minimum voltage rail rise time. Independent Enables for each output allow sequencing to minimize demand on the power supply at start-up. Soft-start on each supply limits inrush current during start-up. Two integrated buck controllers allow efficient, cost-effective voltage conversion for both low and high current supplies such as core and I/O. A 300-mA LDO is integrated to provide an auxiliary rail such as VCCAUX on the Xilinx Spartan-3 FPGA. All three supply voltages are offered in user-programmable options for maximum flexibility.
The TPS75003 is fully specified from –55°C to +125°C and is offered in a QFN package, yielding a highly compact total solution size with high power dissipation capability.
