Compatible With Universal Serial Bus Specification Rev. 2.0
Transmit and Receive Serial Data at Both Full-Speed (12-Mbit/s) and Low-Speed (1.5-Mbit/s) Data Rates
Integrated Bypassable 5-V to 3.3-V Voltage Regulator for Powering Via USB VBUS
VBUS Disconnection Indication Through VP and VM
Used as USB Device Transceiver or USB Host Transceiver
Stable RCV Output During SE0 Condition
Two Single-Ended Receivers With Hysteresis
Low-Power Operation, Ideal for Portable Equipment
Support I/O Voltage Range From 1.65 V to 3.6 V
IEC-61000-4-2 ESD Compliant
±9-kV Contact-Discharge Model (D+, D–, VCC(5.0))
±15-kV Human-Body Model (D+, D–, VCC(5.0))
TUSB1105 Available in Quad Flat No-Lead (QFN) Package; TUSB1106 Available in QFN and Thin Shrink Small-Outline Package (TSSOP)
APPLICATIONS
Mobile Phones
Personal Digital Assistants (PDAs)
Information Appliances (IAs)
Digital Still Cameras (DSCs)
The TUSB1105 and TUSB1106 universal serial bus (USB) transceivers are compliant with the Universal Serial Bus Specification Rev. 2.0. These devices can transmit and receive serial data at both full-speed (12-Mbit/s) and low-speed (1.5-Mbit/s) data rates. The TUSB1105 and TUSB1106 can be used as USB device transceivers or USB host transceivers.
The devices allow USB application-specific ICs (ASICs) and programmable logic devices (PLDs), with power-supply voltages from 1.65 V to 3.6 V, to interface with the physical layer (PHY) of the universal serial bus. They have an integrated 5-V to 3.3-V voltage regulator for direct powering via the USB supply VBUS.
The TUSB1105 allows single-ended and differential input modes selectable by a mode (MODE) input and is available in RGT and RTZ packages. The TUSB1106 allows only differential input mode and is available in PW, RGT, RSV, and RTZ packages.
The TUSB1105 and TUSB1106 are ideal for portable electronic devices, such as mobile phones, personal digital assistants, information appliances, and digital still cameras.