具有選通信號的汽車類差動比較器
| Number of channels (#) | 1 |
| Output type | Open-collector |
| Propagation delay time (μs) | 0.115 |
| Vs (Max) (V) | 30 |
| Vs (Min) (V) | 3.5 |
| Vos (offset voltage @ 25 C) (Max) (mV) | 3 |
| Iq per channel (Typ) (mA) | 5.1 |
| Input bias current (+/-) (Max) (nA) | 100 |
| Rail-to-rail | No |
| Rating | Automotive |
| Operating temperature range (C) | -40 to 125 |
| Features | Strobe, Vos Adj Pin |
| VICR (Max) (V) | 28 |
| VICR (Min) (V) | 0.5 |
- Qualified for Automotive Applications
- Fast Response Times
- Strobe Capability
- Maximum Input Bias Current . . . 150 nA
- Maximum Input Offset Current . . . 20 nA
- Can Operate From Single 5-V Supply
The LM211 is a single high-speed voltage comparator. This device is designed to operate from a wide range of power-supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. This comparator is capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+, or VCC-. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.
